
20
Setting up
Once the correct model of cable box has
been identified, you need to set the cable
box’s output channel. Enter the channel
you use to view channels through your
cable box—usually 3 or 4. Consult your
cable box’s instruction book or your
cable company if you are not sure.
Choose
0/AUX
to use VIDEO INPUT.
When the GUIDE Plus+ Gold System
correctly identifies the correct code for
your VCR, the VCR’s tuner changes to
channel 9. Select
Y
es if the VCR
automatically changed to channel 9, or
No
if it did not. If you select
No
, the
system will try another code.
The last screen comes up when you’ve
successfully finished the GUIDE Plus+
setup.
Select
Yes
if you have a VCR, or
No
if not.
(Answering
No
automatically skips
forward to the end of GUIDE Plus+
setup.) Tune your VCR to channel 2 and
turn it off. Find the brand of your VCR by
using the up and down arrows.
Remember:
• Leave your cable box turned ON to download program information.
• Leave your VCR turned OFF to record programs and download information.
• Press OK to leave the GUIDE Plus+ Gold System setup.
STEP 5: RUN AUTO CHANNEL SEARCH
This is an important step because running the Auto Channel Search searches for all the channels available through the
antenna or cable input. When the monitor finds an active channel, it places it in the channel list; inactive channels (weak
stations or channels with no signal at all) will be removed from the channel list. To run Auto Channel Search:
1. Press MENU on the remote and select
Channel
.
2. Select
Signal Type
and then choose whether you are using cable or an off-air antenna.
3. Press OK to return to the Channel menu.
4. Select
Auto Channel Search
.
5. When the channel search is complete, exit the menu system.
Comentarios a estos manuales