ProScan PS27123 Especificaciones descargar pdf (Pagina 17)

Audio Menu" Basic Functions continued

Receiving Stereo Broadcasts

Your TV is fully capable of reproducing stereo sound from

TV stations transmitting stereo sound in your area. All you

have to do to enjoy stereo sound is to make sure the TV's

STEREO/SAP function is set to STEREOSOthe TV can receive

stereo broadcasts.

Normally this function can be left in the STEREOmode.

Your TV will then automatically reproduce either stereo or

monaural sound, whichever is broadcast.

In some fringe viewing areas, however, the stereo signal

may not be strong enough for quality reception. The signal

may drift, or the reproduction may become noisy. Should

that occur, change the STEREO/SAPfunction to the MONO

mode to receive clearer, cleaner sound.

Helpful Hint: Some television stations lransmit a "pilot" signal that

makes your TV think it's receiving stereo, even though the broadcast

signal is monaural. The "pilot" signal will make the stereo indicator

appear on the screen next to the channel number, however, you will not

be able to hear stereo sound. If the stereo indicator appears but you can

not hear stereo sound _check with the television station to inquire

whetherthe program being broadcasiis in stereo or monaural audio. •

Resettingthe Audio Functionto Receive Stereo

with or without remote

1 Press the MENUbutton repeatedly to select the AUDI0MENU

and then press + to display the audio menu.

Receiving SAP Broadcasts

Some TV stations that broadcast stereo also broadcast

another audio program called SAP. SAP stands for Second

Audio Program and is sometimes used to broadcast a

second audio track for a bilingual movie.

Because SAP is only available with stereo broadcasts, the

TV's STEREO/SAPfunction must be in the STEREOmode to see

if SAP audio is available. After you have set the

STEREO/SAP function to the STEREOmode, your TV will

display the word STEREOnext to the channel number when

stereo audio is being received. If SAP audio is also

available, your TV will display an asterisk (*) after the

word STEREO (STEREO*).

You can then listen to the SAP audio by changing the

STEREO/SAPfunction to its SAPsetting as explained below.

Although SAP audio is transmitted with the stereo signal,

it is not broadcast in stereo. That means the SAP audio

will.be monaural sound.

Your TV will reproduce SAP audio until you change

channels.

Turningon SAP Channel

with or without remotecontrol

1 Press the MENUbutton repeatedly to select the AUDIOMENU

and then press + to display the audio menu.

ram°

o O

Press the MENUbutton repeatedly to selectthe STEREO]SAP

function.

_: *_: _r_,_,_ _:_ _ _,_ : _ _,/,_ ....

Treble -, ....... I........ + Treble -. ....... I........ +

Repeatedly press the MENUbutton until STEREO/SAPis

selected.

Press either + or - repeatedly until the word STEREO appears at

the right.

Note: Each time you prcsg the + or button, the on-screen displa 3,

will change froi11 STEREO"to MONO. (The word SAP may also appear it

SAP audio is present). SAP is explained at the right.

Note: When the STEREO/SAP [unclioj_ is set to the STEREO mode, your.

I'9 will let yon know when a channel is being broadcast and received

• in stereo bydisplaying the word S£.EREOnext to the channcl number.

on the screen. (Press the "Iv or DISPLAY button lo see lhe channel

l}tlnl _L'F)

Repeatedly press either + or- Untilthe word SAP appears at

the right.

Notes: Eachtime you press the + or- button, the function Will

change from STEREOto SAP to MONO(if SAP is available). If SAP is

not available, the function will change from STEREOto MONO.

The word SAP will appear next to the channel number when you arc

listening to SAP audio. (Press the iv or otsP_Y but-ton to see this

display).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Comentarios a estos manuales

Sin comentarios

ProScan PS27123 Especificaciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Televisores Lcd ProScan PS27123