ProScan PRD8630A Guía de usuario descargar pdf (Pagina 12)

3. Using the number keys, enter 9-9-3. (The green light

flashes twice.)

4. Press and release the SELECT key. (The green light

flashes twice.)

NOTE: DIRECTV

Receivers don’t have volume control,

so the remote will not allow the user to lock vol-

ume to the DIRECTV mode.

RESTORING FACTORY DEFAULT SETTINGS

To reset all the functions of the remote control to the

factory defaults (the original, out-of-the-box settings),

follow these steps:

1. Press and hold the MUTE and SELECT keys at the same

time until the green light flashes twice, then release

both keys.

2. Using the number keys, enter 9-8-1. (The green light

flashes 4 times.)

TROUBLESHOOTING

PROBLEM: Light at the top of the remote blinks when you

press a key, but the component does not respond.

SOLUTION 1: Try replacing the batteries (see page 7).

SOLUTION 2: Make sure you are aiming the DIRECTV

Universal Remote Control at your home entertainment

component and that you are within 15 feet of the

component you are trying to control.

PROBLEM: The DIRECTV Universal Remote Control does

not control component or commands are not recognized

properly.

SOLUTION: Try all listed codes for the device brand being

set up. Make sure all components can be operated with an

infrared remote control.

PROBLEM: TV/VCR combo does not respond properly.

SOLUTION: Use the VCR codes for your brand. Some combo

units may require both a TV code and a VCR code for full

operation (see page 8).

PROBLEM: CHAN

S, CHANT, and PREV do not work for

your RCA TV.

SOLUTION: Due to RCA design for certain models (1983-

1987), only the original remote control will operate these

functions.

PROBLEM: Changing channels does not work properly.

SOLUTION: If original remote control required pressing

ENTER to change channels, press ENTER on the DIRECTV

Universal remote control after entering a channel number.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comentarios a estos manuales

Sin comentarios

ProScan PRD8630A Guía de usuario Pagina 12

Comentarios a estos manuales