ProScan pledv2213a Manual de usuario

PLEDV2 A312USER’S MANUAL22” LED TV/DVD COMBO

Front View Rear View Mounting Pattern Identifying Front and Rear PanelINDICATORLIGHT – The light is red when power is plugged in but the TV is not tur

If You Have Digital Cable without Cable Box or Antenna… Connection Suggestions1.Make sure the power of HDTV is turnedoff. 2.Connect the RF cable

Connecting Wii™ with Composite… 1.Make sure the power of HDTV and your Wii™ is turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video co

Connecting Cable or Satellite boxes with HDMI… 1.Make sure the power of HDTV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI o

Connecting to a PC with VGA and 3.5 mm minijack … 1. Make sure the power of HDTV and your PC is turned off. 2. Obtain a 15-pin D-Sub VGA cable; connec

Main unit description Control Panel Button Function VOL+:Increase volume; if OSD is active, functions as right in the menu; in SOURCE menu, function

Remote control: Press this button to switch on the TV when at standby mode or enter standby mode. : Press this button to mute or restore sound.MTS/A

/FAV˖˖Press to start playing the disc or STORAGE , or to pause playing (Used for models with STORAGE or DVD function only)/ Switch between custom set

Installation Guide Press MENU button to display the MAIN OSD MENU; Press Ż / Źbutton to select the MENU you want; Press ENTER button to enter the su

a. Press “c/d” button to “Aspect Ratio” and “ e/f” button to select.b. Press “c/d” button to “Noise Reduction” and press the button to select.c. Pres

Contents Introduction  Warning  Caution Important Information  Attaching or Removing the Stand  Installing Batteries to the Remote Control  Id

Note: The bǃcǃdǃeǃfǃg function it is only available in USER mode. 2. Press “c/d” button to select “MTS” and press the “e/f” button to adjust. Note: It

1. Press “d” button to select “OSD Language” and press the “e/f” button to select the OSD language which you desire.2. Press “c/d” button to elect “T

(a). Press “c/d” button to select “Mode” the “e/f” button to adjust. (b). Press “c/d” button to select “Font Style” the “e/f” button to adjust.(c). Pr

a. Press “c/d” button to select “Audio Only” the “e/f” button to select “On” or “Off”. b. Press “c/d” button to select “Blue Screen” the “e/f” button

c. Press “cc/d” button to select “Time Zone” and press the “e/f” button to select time zone. d. Press “c/d” button to select “Daylight Saving Time” an

LOCKPress the “MENU” button to enter the OSD menu .Then press “ee/f” button to select the “Lock” menu. 1. Press “d” button to select “Enter Password”

c.Press “c/d” button to select “HDMI” and press the “e/f” button to select “Block” or “Unblock”.d.Press “c/d” button to select “PC” and press the “e/f

Note: The item is available only when current stream has downloadable rating data. 8. Press “c/d” button to select “Reset RRT” and press “ENTER/f” but

1. Press “c/d” button to select “H-Pos” and press the “e/f” button to adjust. 2. Press “c/d” button to select “V-Pos” and press the “e/f” button to ad

DVD manual BASIC PLAY BACK IMPORTANT NOTE; ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREE

Introduction Thank you very muchfor purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very be

SUBTITLE Press “ SUBTITLE ”, the screen will display “ SUBTI-TLE 01/XX XXXXX “, “01” indicates the ordinal number of this language; “XX” indicates tot

SPECIAL FUNCTION PLAYBCK You can viewKodak picture CD and JPEG picture CD on this TV. PlaybackInsert a Kodak picture CD or JPEG picture CD into the

DVD SYSTEM SETUP 4:3 /PS (PS=Panand Scan) You may select if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB (letter box) i

DVD SYSTEM SETUP(CONTINUED) General Setup Page TV Display: user can select different display wide model such as 4:3 PS, 4:3 LB, 16:9 WIDE. On Screen

Preference page The preference page is only available when there is no disc in the player . these settings are applied consistently to all discs w

Default: resets all settings(except password and parental lock status) for this DVD player back to the manufacturers original settings, press ENTE

PLAYABLE DISCS The following discs can be played;DISCS LABEL CONTENTS DIMENSION DVD VIDEO Audio + video (moving picture) 12cm AUDIO CD Audio 12cmJPEG

DICS PROTECTION AND DVD CHARACTERSTICS Compare DVD disc with other discs; DVD LG SVCD VCD CDEncodemethod Digital/MPEGý Analog Digital Digital/MPEG 1 D

How do I Clean the TV?IMPORTANT 1. The power cable has to be removed from the socket before cleaning the TV. 2. Do not use volatile solvent (alcohol,

TroubleshootingProblems SolutionsNO PICTURE Connect power cord correctly. Turn on power.Connect video cable correctly. Select the input signal source

Warning Thissymbolis intended to alert the user to avoid the risk of electric shock. This equipment may only be disassembled by qualified service pers

TV CHANNELS AREBLOCKED Check your auto lock function’s settings inside the OSD. You may have locked up some channels but forgot about them. UNIVERS

SWITCHING A CHANNEL OR SOURCE CHANGES THE VOLUME Different channels and inputs will sometimes have this effect because the channel signal’s own volume

9.5041

Sound Mode Music/Standard/ Movie/User/Sport seY lortnoC emuloV otuA150Hz/500Hz/1KHz/5KHz/10KHz/Balance enoTSpeakers 3watt per channel (3) General

FCC Compliance StatementThis device complies with Part 15 of the FCC Rules.Operation is subject to the following conditions: This device may not cause

CautionCaution High voltages are used in the operation of this product. - Do not open the product's casing. Refer servicing to

CautionCaution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to

Television Antenna Connection Protection Important InformationExternal TelevisionAntenna GroundingIf an outside antenna or cable system is to be conne

Attacthing or Removing the Stand1. To attach the base place the display unit flat on a table. Afterwards attach the stand onto .dnats eht eruces ot s

2.Toremove the stand, remove the 2 screws in the area and the stand will come off.Installing Batteries tothe Remote Control Please insert two AAAbatte